Ohm's Law Calculator
Enter any two of voltage (V), current (I), and resistance (R) to calculate the third value and power (W).
What is Ohm's Law?
Ohm's Law states that voltage equals current multiplied by resistance (V = I × R). Power is then calculated as P = V × I.
V = I × R, P = V × I
Worked examples
12 V across 6 Ω drives 2 A, and the resistor dissipates 12 × 2 = 24 W — a component that would need a heatsink.
A 5 V USB supply delivering 0.5 A sees an effective load of 5 ÷ 0.5 = 10 Ω and provides 2.5 W.
What the calculation assumes
The law applies to a linear, purely resistive element at a steady temperature: the resistance must not change with voltage, so lamps, diodes and motors do not follow it directly. Voltage is in volts, current in amperes and resistance in ohms, and power in watts follows from P = V × I = V² / R = I² × R at any instant.
Frequently asked questions
- Why does the power change with the square of the current?
- Because P = I²R: doubling the current quadruples the heat in the same resistance, which is why wire gauges are chosen from current, not voltage.
- What happens if I know only the power?
- Combine the law with the power equation: R = V² / P and I = P / V. For a 60 W lamp on 120 V the current is 0.5 A and the resistance 240 Ω.
- Does the law hold for real components?
- Only approximately. Resistors drift with temperature, semiconductors are non-linear and reactive parts shift the phase, so AC work needs impedance rather than plain resistance.