EV Charging Cost Calculator
Estimate the cost and driving range gained from charging an electric vehicle such as a Tesla, based on battery capacity and electricity rate.
How is EV Charging Cost Calculated?
Energy needed = battery capacity × (target% − current%) ÷ 100 ÷ charging efficiency. Total cost = energy needed × electricity rate per kWh.
Electricity rates and charging efficiency vary by charger type (home AC vs. DC fast charging) and provider — adjust values to match your actual plan.
Worked examples
A 75 kWh battery charged from 20% to 80% needs 0.6 × 75 = 45 kWh, or 50 kWh after 90% efficiency; at $0.30 per kWh the session costs about $15.00 and adds roughly 275 km.
A 100 kWh battery taken from 10% to 90% needs 88.9 kWh with the same losses, about $26.67, and adds some 489 km of range.
What the estimate assumes
Energy needed is capacity times the charge difference, divided by charging efficiency because part of the power is lost as heat in the charger and battery. The range figure uses a flat 5.5 km per kWh, which suits mild weather and mixed driving; cold weather, heating and motorway speeds can cut it by a third. Rates vary widely between home AC and DC fast chargers.
Frequently asked questions
- Why divide by charging efficiency?
- Only part of the metered energy reaches the battery. At 90% efficiency you buy 10% more than the pack stores, which is why 45 kWh becomes 50 kWh on the bill.
- What does it cost per kilometre?
- Divide the rate by the efficiency-adjusted economy: $0.30 per kWh at 5.5 km per kWh gives about $0.055 per km, or roughly $0.09 per mile.
- Does fast charging change the picture?
- DC fast chargers often cost two to three times the home rate, so the same session can triple in price; they remain useful mainly on long trips.